8Ch HD-SDI & 10/100 Fast Ethernet Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km

8Ch HD-SDI & 10/100 Fast Ethernet Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Transport up to eight full rate HD-SDI digital video signals at 1.5Gbps each and Fast Ethernet 10/100mb/s over a single strand of fiber cable up to 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422 links, or 4 contact closure lines per Aux interface. The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI or DVB-ASI digital video signals. The F-M8SDI-ET platform delivers more functionality and performance over a single fiber than has ever been available in off the shelf equipment. Each of the 8 HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate. Each channel carries its own embedded audio and ancillary data and operates as if it were the only signal on the fiber. The 8 channel platform offers the same 5 pin Aux port custom signal options as the two and four channel units. However functionality is doubled by providing 2 independent Aux links that can be customized for 4 channel bi-directional or unidirectional audio, 1 or 2 duplex RS-232/422 links, or 4 line contact closure. 10/100 Fast Ethernet is full duplex. Features: Supports 8 full rate HD-SDI @ 1.5Gbps or lower SDI or ASI digital video Full Duplex 10/100Mbps Fast Ethernet via RJ45  Transports embedded audio channels as well as SDI ancillary data Return path serial RS-485 channel for controlling equipment on Tx end Link alarm indicators on both Tx & Rx indicate a problem with the fiber Specifications: HD-SDI Input : HD-SDI, SD-SDI, or DVB-ASI; 0 - 1.5 Gbps Serial Digital Signal Input Signal Standard : SMPTE292M,SMPTE259M,SMPTE297M,SMPTE310, SMPTE305(SDTI), DVB-ASI(EN50083-9) Number of Inputs : 8 SDI, 1 RS-485, 2 Auxiliary, 1 RJ45 FE Signal Level : > 380mVp-p Impedance : 75Ω Connector : BNC Distance : 20km (Up to 100km on special order) Power Supply : 130 - 260 VAC @ 50-60 Hz Power Consumption : <10W Temperature : 0 to +70 Degree Humidity : 0 to 95% Connector : ST/PC RH: Non Condensing   Product Documents & Videos Spec Sheet Click to Download Thor Fiber Family of Products Click to Download