The store will not work correctly in the case when cookies are disabled.
8Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km
Add to Wish List
8Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Transport up to eight full rate HD-SDI digital video signals at 1.5Gbps each over a single strand of fiber cable up to 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422 links, or 4 contact closure lines per Aux interface. The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI or DVB-ASI digital video signals. The F-M8SDI platform delivers more functionality and performance over a single fiber than has ever been available in off the shelf equipment. Each of the 8 HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate. Each channel carries its own embedded audio and ancillary data and operates as if it were the only signal on the fiber. This is accomplished with CWDM technology. The 8 channel platform offers the same 5 pin Aux port custom signal options as the two and four channel units. However functionality is doubled by providing 2 independent Aux links that can be customized for 4 channel bi-directional or unidirectional audio, 1 or 2 duplex RS-232/422 links, or 4 line contact closure. Features: Supports 8 full rate HD-SDI @ 1.5Gbps or lower SDI or ASI digital video Transports embedded audio channels as well as SDI ancillary data Return path serial RS-485 channel for controlling equipment on Tx end Link alarm indicators on both Tx & Rx indicate a problem with the fiber Specifications: HD-SDI Input : HD-SDI, SD-SDI, or DVB-ASI; 0 - 1.5 Gbps Serial Digital Signal Input Signal Standard : SMPTE292M,SMPTE259M,SMPTE297M,SMPTE310, SMPTE305(SDTI), DVB-ASI(EN50083-9) Number of Inputs : 8 SDI, 1 RS-485, 2 Auxiliary Signal Level : > 380mVp-p Impedance : 75Ω Connector : BNC Distance : 20km (Up to 100km on special order) Mini box : 25×116×110cm Power Supply : 130 - 260 VAC @ 50-60 Hz Power Consumption : <10W Temperature : 0 to +70 Degree Humidity : 0 to 95% Connector : ST/PC Optical Channels : CWDM RH: Non Condensing
8Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Transport up to eight full rate HD-SDI digital video signals at 1.5Gbps each over a single strand of fiber cable up to 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422 links, or 4 contact closure lines per Aux interface. The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI or DVB-ASI digital video signals. The F-M8SDI platform delivers more functionality and performance over a single fiber than has ever been available in off the shelf equipment. Each of the 8 HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate. Each channel carries its own embedded audio and ancillary data and operates as if it were the only signal on the fiber. This is accomplished with CWDM technology. The 8 channel platform offers the same 5 pin Aux port custom signal options as the two and four channel units. However functionality is doubled by providing 2 independent Aux links that can be customized for 4 channel bi-directional or unidirectional audio, 1 or 2 duplex RS-232/422 links, or 4 line contact closure. Features: Supports 8 full rate HD-SDI @ 1.5Gbps or lower SDI or ASI digital video Transports embedded audio channels as well as SDI ancillary data Return path serial RS-485 channel for controlling equipment on Tx end Link alarm indicators on both Tx & Rx indicate a problem with the fiber Specifications: HD-SDI Input : HD-SDI, SD-SDI, or DVB-ASI; 0 - 1.5 Gbps Serial Digital Signal Input Signal Standard : SMPTE292M,SMPTE259M,SMPTE297M,SMPTE310, SMPTE305(SDTI), DVB-ASI(EN50083-9) Number of Inputs : 8 SDI, 1 RS-485, 2 Auxiliary Signal Level : > 380mVp-p Impedance : 75Ω Connector : BNC Distance : 20km (Up to 100km on special order) Mini box : 25×116×110cm Power Supply : 130 - 260 VAC @ 50-60 Hz Power Consumption : <10W Temperature : 0 to +70 Degree Humidity : 0 to 95% Connector : ST/PC Optical Channels : CWDM RH: Non Condensing
See More
8Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Transport up to eight full rate HD-SDI digital video signals at 1.5Gbps each over a single strand of fiber cable up to 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422 links, or 4 contact closure lines per Aux interface. The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI or DVB-ASI digital video signals. The F-M8SDI platform delivers more functionality and performance over a single fiber than has ever been available in off the shelf equipment. Each of the 8 HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate. Each channel carries its own embedded audio and ancillary data and operates as if it were the only signal on the fiber. This is accomplished with CWDM technology. The 8 channel platform offers the same 5 pin Aux port custom signal options as the two and four channel units. However functionality is doubled by providing 2 independent Aux links that can be customized for 4 channel bi-directional or unidirectional audio, 1 or 2 duplex RS-232/422 links, or 4 line contact closure. Features: Supports 8 full rate HD-SDI @ 1.5Gbps or lower SDI or ASI digital video Transports embedded audio channels as well as SDI ancillary data Return path serial RS-485 channel for controlling equipment on Tx end Link alarm indicators on both Tx & Rx indicate a problem with the fiber Specifications: HD-SDI Input : HD-SDI, SD-SDI, or DVB-ASI; 0 - 1.5 Gbps Serial Digital Signal Input Signal Standard : SMPTE292M,SMPTE259M,SMPTE297M,SMPTE310, SMPTE305(SDTI), DVB-ASI(EN50083-9) Number of Inputs : 8 SDI, 1 RS-485, 2 Auxiliary Signal Level : > 380mVp-p Impedance : 75Ω Connector : BNC Distance : 20km (Up to 100km on special order) Mini box : 25×116×110cm Power Supply : 130 - 260 VAC @ 50-60 Hz Power Consumption : <10W Temperature : 0 to +70 Degree Humidity : 0 to 95% Connector : ST/PC Optical Channels : CWDM RH: Non Condensing
