CMD 4000 In-band Commander The Sencore In-Band Commander can be deployed as part of a system to control Sencore receiver/decoders in the field. The CMD 4000 control server can configure and update fielded units from a central location, saving an operator time and money spent on costly “truck rolls.” The CMD-4000 connects to an outbound multiplexer via ASI. The unit generates a standard MPEG transport stream containing control data and carouselled update files, which the multiplexer injects into the outgoing TS to be received and processed by Sencore devices downstream. The Commander can be driven by a human operator through an intuitive web interface, or connected directly to an existing, upstream NMS/EMS for automated command queueing. The Commander applies a retransmission scheme and per-packet checksums to protect outgoing data, allowing deployed units to receive commands even in the presence of atmospheric interference or intermittent signalling issues. ASI Output Connector: 75Ω BNC Packet format: 188 bytes per packet TS Format: In-Band Control PIDs plus Nulls Management Connector: RJ-45 10/100/1000 - Auto Neg. Protocols: HTTP and SNMP User Interfaces: Full control via web GUI Automation Interfaces: Full status and control via SNMP SNMP traps on alarms Web services access to main GUI Firmware Updates: Via Web GUI Dimensions/Power Height: 1 RU, 1.72” (44 mm) Width: 1 RU, 17.2” (437 mm) Depth: 22.5” (572 mm) Power: 100-240 VAC 50/60 Hz Environmental Conditions Operating Temp: 0° to 45°C Storage Temp: -40°C to 65°C Relative Operating Humidity: <95% (non-condensing) Product Documents & Videos Spec Sheet Click to Download CMD 4000 In-band Commander The Sencore In-Band Commander can be deployed as part of a system to control Sencore receiver/decoders in the field. The CMD 4000 control server can configure and update fielded units from a central location, saving an operator time and money spent on costly “truck rolls.” The CMD-4000 connects to an outbound multiplexer via ASI. The unit generates a standard MPEG transport stream containing control data and carouselled update files, which the multiplexer injects into the outgoing TS to be received and processed by Sencore devices downstream. The Commander can be driven by a human operator through an intuitive web interface, or connected directly to an existing, upstream NMS/EMS for automated command queueing. The Commander applies a retransmission scheme and per-packet checksums to protect outgoing data, allowing deployed units to receive commands even in the presence of atmospheric interference or intermittent signalling issues. ASI Output Connector: 75Ω BNC Packet format: 188 bytes per packet TS Format: In-Band Control PIDs plus Nulls Management Connector: RJ-45 10/100/1000 - Auto Neg. Protocols: HTTP and SNMP User Interfaces: Full control via web GUI Automation Interfaces: Full status and control via SNMP SNMP traps on alarms Web services access to main GUI Firmware Updates: Via Web GUI Dimensions/Power Height: 1 RU, 1.72” (44 mm) Width: 1 RU, 17.2” (437 mm) Depth: 22.5” (572 mm) Power: 100-240 VAC 50/60 Hz Environmental Conditions Operating Temp: 0° to 45°C Storage Temp: -40°C to 65°C Relative Operating Humidity: <95% (non-condensing) Product Documents & Videos Spec Sheet Click to Download See More
CMD 4000 In-band Commander The Sencore In-Band Commander can be deployed as part of a system to control Sencore receiver/decoders in the field. The CMD 4000 control server can configure and update fielded units from a central location, saving an operator time and money spent on costly “truck rolls.” The CMD-4000 connects to an outbound multiplexer via ASI. The unit generates a standard MPEG transport stream containing control data and carouselled update files, which the multiplexer injects into the outgoing TS to be received and processed by Sencore devices downstream. The Commander can be driven by a human operator through an intuitive web interface, or connected directly to an existing, upstream NMS/EMS for automated command queueing. The Commander applies a retransmission scheme and per-packet checksums to protect outgoing data, allowing deployed units to receive commands even in the presence of atmospheric interference or intermittent signalling issues. ASI Output Connector: 75Ω BNC Packet format: 188 bytes per packet TS Format: In-Band Control PIDs plus Nulls Management Connector: RJ-45 10/100/1000 - Auto Neg. Protocols: HTTP and SNMP User Interfaces: Full control via web GUI Automation Interfaces: Full status and control via SNMP SNMP traps on alarms Web services access to main GUI Firmware Updates: Via Web GUI Dimensions/Power Height: 1 RU, 1.72” (44 mm) Width: 1 RU, 17.2” (437 mm) Depth: 22.5” (572 mm) Power: 100-240 VAC 50/60 Hz Environmental Conditions Operating Temp: 0° to 45°C Storage Temp: -40°C to 65°C Relative Operating Humidity: <95% (non-condensing) Product Documents & Videos Spec Sheet Click to Download
