DEV 1982 8x8 Distributing Matrix

DEV 1982 8x8 Distributing Matrix, 950 - 2150 MHz, 75 Ohm, F(f) The compact DEV 1982 8² Distributing or Combining Matrix offers an ideal mix of cost and performance plus unique advantages especially for small configuration environments such as SNG vehicles.  Available in sizes 4x4, 4x8, 8x4 or 8x8 it is easily field upgradeable to the maximum size of 8x8, without any disruption of service. Various connector types, 50 or 75 Ohm, optical inputs, redundancy options, TRAC, and hot swappable power supplies let customers configure the device to their needs. A 9th output comes as a standard feature for monitoring purposes. Additional features such as variable gain and slope deliver optimized and linear RF signal transmission. Built-in LNB powering, full color display user interface, and dual redundant field replaceable power supplies give cable, satellite, and broadcast facilities the highest reliability and functionality.  The 8² is manageable via SNMP and DEV Web Interface. It is suitable for various redundancy purposes, and can be operated in autonomous mode. Features 4x4 up to 8x8 switching matrix in only 1 RU  Various Input and Output Modules Available Optical or Electrical Inputs: 75 Ohm F, 75 Ohm BNC, 50 Ohm SMA Variable Gain (MGC or AGC)  Variable Slope  Field upgradable RF Sensing for each channel individually Extra 9th switchable Output Port for Monitoring  LNB Powering including Current Monitoring, 13/18V & 0/22 kHz Tone  Graphical Local User Interface  Input Channel Redundancy  Power Supply Redundancy  Secure Lock Operation  DEV Web Interface SNMP Support  Various redundancy options Easy to use DEV Web Interface  Signal Recording and Data Backup Feature Benefits Extra switchable Output Port allows permanent Monitoring while the System remains in Service Most versatile Matrix up to 8x8 in 1 RU Various Connector and Impedance Options allows flexible Use Intelligent Software Options makes the Matrix a Key Part of a Transmission System Graphical Local User Interface enables full Control Optical Inputs compatible with Optical LNB, Dual Fiber Output Ku-band PLL LNB from Swedish Microwave Specifications Capacity   Number of Inputs x Outputs 8x8 RF Specifications   Frequency Range 950 - 2150 MHz Impedance, Connectors 75 Ohm, precision F (f) Damage Level +25 dBm Operational Input Level <-5 dBm Return Loss >14 dB Variable Gain 35 dB Flatness ±3.0 dB (over entire Band)   ±0.4 dB (in any 36 MHz Interval) Isolation Input/Input, Output/Output: typ. 60 dB   Input/Output (Crosstalk): typ. 60 dB   Off:   typ. 80 dB Intermodulation Distortion <-40 dBc (two Tones @ -8 dBm) Group Delay Distortion <7 ns Noise Figure <14 dB OP1dB   0 dBm Relay Type Semiconductor Monitoring Port   Impedance, Connector 50 Ohm, SMA (f) Return Loss >14 dB Local Operation   Display 2.2" Full Color (18 Bits) Controls   Rotary Switch Remote Communication   Interface (Connector) Ethernet (RJ-45) Remote Control & Surveillance Interface via Web Interface (Ethernet)   via SNMP (Ethernet) Redundant Power Supply     Supply Voltage 100 - 240 VAC supplied by two different Lines Power Consumption Maximum 100 VA General Specifications     Width 19” Height 1.75” (1 RU) Depth 11.82” Weight 13.25 lbs Environmental Conditions ETS 300019 Part 1-3   Class 3.1E   Options   Option 20I Change 4 Input Channels to 50 Ohm, SMA (f) Option 20B Change 4 Input Channels to 50 Ohm, SMA (f) with LNB Powering Option 20O Change 4 Output Channels to 50 Ohm, SMA (f) Option 21I Change 4 Input Channels to 75 Ohm, BNC (f) Option 21B Change 4 Input Channels to 75 Ohm, BNC (f) with LNB Powering Option 21O Change 4 Output Channels to 75 Ohm, BNC (f) Option 22I Change 4 Input Channels to Optical providing LC/APC Option 23B Change 4 Input Channels to 75 Ohm, F (f) with LNB Powering Option 25 Variable Slope (all Channels) Option 38 Secure Lock Operation Option 48 Input Channel Redundancy Option 79 Additional Web License 1 RU Option 85 Configured with 4 Input Channels rather than 8 (Can be expanded in future) Option 86 Configured with 4 Output rather than 8 (Can be expanded in future)   Modules (Input and Output Modules for Upgrade or Spares) DEV 13-0242 Input Module incl. LNB Powering, 4 Paths; 950 - 2150 MHz; 75 Ohm, F (f) DEV 13-0253 Optical Input Module, 4 Paths; LC/APC   DEV 13-0268 Input Module, 4 Paths; 950 - 2150 MHz; 75 Ohm, BNC (f) DEV 13-0269 Output Module, 4 Paths; 950 - 2150 MHz; 75 Ohm, BNC (f) DEV 13-0270 Input Module, 4 Paths; 950 - 2150 MHz; 50 Ohm, SMA (f) DEV 13-0271 Output Module, 4 Paths; 950 - 2150 MHz; 50 Ohm, SMA (f) DEV 13-0276 Input Module, 4 Paths; 950 - 2150 MHz; 75 Ohm, F (f) DEV 13-0280 Input Module incl. LNB Powering, 4 Paths; 950 - 2150 MHz; 75 Ohm, BNC (f) DEV 13-0293 Output Module, 4 Paths; 950 - 2150 MHz; 75 Ohm, F (f)   Product Documents & Videos Brochure Click to Download Technical Specs Click to Download User Manual Click to Download